pedzel2.png

szukasz Profesjonalnych rozwiązań?

Wypełnij krótki formularz, a nasz doradca skontaktuje się  w możliwie krótkim czasie

 

 Formularz kontaktowy

Start > Start > Special offer > Landmark Renovation

Landmark Renovation

Restoration of architectural objects of historical significance is a serious problem. On the one hand it is necessary to preserve the look and feel consistent with the era in which the object was created, and at the same time protect it from the ravages of weather conditions and other factors affecting its status. The use of modern materials with high protective efficacy often can not be reconciled with the requirements of maintenance. In turn, the materials originally used in the facility do not provide sufficient protection against destruction.

  • A cement paint designed for painting cement plaster, cement-lime, bricks and concrete. Recommended for facades and interiors ofdamp buildings. After drying it withstands washing with pressurized water \, while maintaining good vapor permeability. Itsproperties are comparable with silicate paint. SILANT 100 is one of the few paints that can be used on fresh plaster. Available colors: yellow, beige, beige, salmon, oranżowy, pink, green, blue, olive green, gray. Provides a single coat covering.
  • FARBA SILIKONOWA is a modern water-borne silicone paint designed for painting of building elements both inside and outdoors. It is characterized by unique properties of water vapor permeability. It is recommended for painting mineral and polymer plasters (eg acrylic or silicone), concrete elements, the surfaces requiring high resistance to atmospheric agents, including the exteriors of buildings of historical significance. It gives a homogeneous, well-covering, smooth, flexible coating.
  • SIL-GRUNT is a deep penetrating, waterborne primer preparation intended for indoor building surfaces (regardless of the degree of moisture) and oexterior of buildings. Application results in an increase in adhesion, strengthening load capacity, standardization of consistency and absorbency of the substrate, while not hindering the process of so-called. "Breathing". Prevents discoloration and stains. Reduces wear of topcoats. These features are the result of the application of the particulate polymer with an extremely small particle size (so called hydrosol) that are many times smaller than those used in conventional acrylic primers. This ensures deep penetration into the porous substrate.
  • A waterborne silicate paint for application on the exterior and interior. It protects facades from moisture absorption, giving a durable, hydrophobic layer with good adhesion and very high vapor permeability. It is resistant to washing and weathering. It includes measures to prevent the growth of algae, mold and mildew on the surface. It can be used on: mineral and polymer (eg acrylic), concrete & brick walls.
  • A silicate priming preparation for priming before applying a silicate plaster or paintingwith a silicate paint. Designed for use on a variety of building materials such as: mineral and polymer (eg acrylicplasters), concrete & brick walls. Use results in an increase in adhesion, standardization of consistency & absorbency of the substrate. Prevents stains and spots. By reducing the absorption of the substrate facilitates the application of silicate paint with a brush or a roller. It is supplied as a colorless liquid (as opposed to a white acrylic formulations).
  • Snow-white finishing plaster based on white cement for interior and exterior use. Designed to smooth the surface of concrete, wood and wood-based surfaces & plasterboard. It is a high-strength,very malleable. It provides singlecoat coverage for most paints, without the need for priming
  • Gładź wewnętrzna is a high quality material produced from natural mineral fillers and modifiers that provide ductility and ease of application and processing. When binding, it is not subject to the phenomenon of contraction. The big advantage is achieved whiteness, which reduces paint consumption, and excellent machinability of the dried surface. It can be used to fill cavities, cracks in the plaster and patching of plasterboard.
  • A ready for use silicone plaster with stucco structure, intended for the application of thin-film, decorative plaster for interior and exterior surfaces made of concrete, cement mortar or glue plasters. It has very good adhesion to the recommended substrates, giving an extremely durable, decorative coating. Based on modified silicone resins plaster is particularly resistant to water, weather conditions, mechanical damage, resistant to dirt (self-cleaning effect) and characterized by very high permeability to gases and vapors.
  • A two-component mineral stucco plastering mortar, intended for the application of thin-film, decorative plaster for interior and exterior surfaces made of concrete, cement mortar or glue. It has very good adhesion to the recommended substrates, giving a durable, decorative coating. Based on the mineral gypsum binders thatb are particularly resistant to water, weather conditions, mechanical damage, resistant to dirt (photocatalytic effect) and are characterized by a unique permeability to gases and vapors (diffusivity).
  • A waterborne silicate paint suitable for painting interiors and building facades. It protects facades against moisture uptake, resulting in a stable, hydrophobic layer with very good adherence to the substrate and a very high vapor permeability. It is resistant to washing and weathering. It an be used on a variety of building materials such as: mineral and polymer (eg acrylic) plasters, concrete, & brick walls. It contains a photocatalyst obtained by nanotechnology, so the paint film exhibits the ability to remove contaminants from the surface. Wall Surfaces remain clean and fresh longer. It is available in many pastel colors.

Ta strona używa ciasteczek (cookies), dzięki którym nasz serwis może działać lepiej.