pedzel2.png

szukasz Profesjonalnych rozwiązań?

Wypełnij krótki formularz, a nasz doradca skontaktuje się  w możliwie krótkim czasie

 

 Formularz kontaktowy

Start > Start > Ready-made solutions > Elevations & facades

Elevations & facades

Detailed information is available in the technical data sheets, safety data sheets and instructions for use, which must be read before using these products.

 

Depending on the required surface characteristics, and operating conditions we recommend  of the following Kits. In the case of raw (unpainted) substrate, priming of the substrate is required.

  • FARBA SILIKONOWA is a modern water-borne silicone paint designed for painting of building elements both inside and outdoors. It is characterized by unique properties of water vapor permeability. It is recommended for painting mineral and polymer plasters (eg acrylic or silicone), concrete elements, the surfaces requiring high resistance to atmospheric agents, including the exteriors of buildings of historical significance. It gives a homogeneous, well-covering, smooth, flexible coating.
  • SIL-GRUNT is a deep penetrating, waterborne primer preparation intended for indoor building surfaces (regardless of the degree of moisture) and oexterior of buildings. Application results in an increase in adhesion, strengthening load capacity, standardization of consistency and absorbency of the substrate, while not hindering the process of so-called. "Breathing". Prevents discoloration and stains. Reduces wear of topcoats. These features are the result of the application of the particulate polymer with an extremely small particle size (so called hydrosol) that are many times smaller than those used in conventional acrylic primers. This ensures deep penetration into the porous substrate.
  • Acrylic facade paint is designed for painting of building facades, balconies, indoor walls, in particular all areas requiring high durability such as production halls. Can be used on cement and cement-lime plasters, concrete substrates and cement binder cladding panels. Dirty coating can be cleaned using a cloth or soft brush. Also available in ready-made colors (as FAADA KOLOR): orange, sand, beige, yellow, brown, green.
  • Acrylic facade paint is designed for painting of building facades, balconies, indoor walls, in particular all areas requiring high durability such as production halls. Can be used on cement and cement-lime plasters, concrete substrates and cement binder cladding panels. Dirty coating can be cleaned using a cloth or soft brush. Also available in ready-made colors (as FAADA KOLOR): orange, sand, beige, yellow, brown, green.
  • Wodorozcieńczalna farba akrylowa do malowania wewnątrz i na zewnątrz. Zabezpiecza fasady przed wchłanianiem wilgoci, nie przeszkadzając w procesie tzw. „oddychania”. Powierzchniom wewnątrz nadaje estetyczny i trwały wygląd, umożliwiając zmywanie zabrudzeń. Może być stosowana na: tynk, beton, cegły, gips, materiały drewnopochodne, płyty kartonowo-gipsowe, tapety papierowe i z włókna szklanego. Odporna na szorowanie – zabrudzone powłoki można oczyścić przy pomocy szmatki lub miękkiej szczoteczki
  • BIEL-GRUNT is a waterborne acrylic primer designed for coating surfaces in Interior and exterior construction. It is recommended for use under acrylic paints, ordinary emulsion paints, heavy vinyland glass fiber wallpaper, ceramic wall and floor tiles. It gives a transparent layer after drying. It can be used for a variety of construction materials. When properly applied, it raises the adhesion, cohesion and unification of the absorbency of the substrate, while not hindering the process of so-called. "Wall breathing".
  • GRUNDER PC-33 is a waterborne acrylic primer designed for coating surfaces in Interior and exterior construction. It is recommended for use under acrylic paints, ordinary emulsion paints, heavy vinyland glass fiber wallpaper, ceramic wall and floor tiles. It gives a transparent layer after drying. It can be used for a variety of construction materials. When properly applied, it raises the adhesion, cohesion and unification of the absorbency of the substrate, while not hindering the process of so-called. "Wall breathing".
  • Latex is water based latex paint designed for painting walls and ceilings of rooms that are particularly vulnerable to dirt and therefore require frequent washing, such as public buildings: health care facilities, restaurants, hotel lobbies, offices, libraries, schools, corridors and stairways but also surfaces exposed to frequent contact with moisture: bathrooms, walls around pools, kitchens. It gives waterproof, flexible, smooth, very well cocovering, crisp coating with high durability on a variety of building materials.
  • BIEL-GRUNT is a waterborne acrylic primer designed for coating surfaces in Interior and exterior construction. It is recommended for use under acrylic paints, ordinary emulsion paints, heavy vinyland glass fiber wallpaper, ceramic wall and floor tiles. It gives a transparent layer after drying. It can be used for a variety of construction materials. When properly applied, it raises the adhesion, cohesion and unification of the absorbency of the substrate, while not hindering the process of so-called. "Wall breathing".
  • GRUNDER PC-33 is a waterborne acrylic primer designed for coating surfaces in Interior and exterior construction. It is recommended for use under acrylic paints, ordinary emulsion paints, heavy vinyland glass fiber wallpaper, ceramic wall and floor tiles. It gives a transparent layer after drying. It can be used for a variety of construction materials. When properly applied, it raises the adhesion, cohesion and unification of the absorbency of the substrate, while not hindering the process of so-called. "Wall breathing".

For painting of plinths and the lower parts of walls, including fragments of the floor.

  • FARBA NA BETON is a water-borne acrylic-silicone paint designed for painting of building elements both inside and outdoors. Especially recommended for painting concrete elements, such as lightly loaded floors, surfaces of concrete structures (eg fences, patios, pillars, spans), shingles and and ligno-cement. It can be used on a variety of construction materials, like plaster, concrete, brick, gypsum, wood, wood-based materials & plasterboard, giving a durable, water-resistant, flexible coating. Protects the exterior walls of buildings against moisture absorption.

For painting of cracked surfaces of walls.

  • LATEX ELASTOMER isa water based elastomer paint that covers the capillaries and shrinkage cracks of the substrate. It is designed for painting of facade and interior walls of buildings. Its has a high flexibility in a wide temperature range and forms a coating resistant to atmospheric agents, characterized by low water absorption and excellent adhesion to the substrate. The presence of reinforcing fibers increases the high mechanical strength of the coating. It can be used on mineral plaster ( cement-lime, cement, silicate, gypsum ) and polymer (eg acrylic ) & concrete. It is recommended for painting walls and ceilings of rooms that are particularly vulnerable to dirt and therefore require frequent washing, such as public buildings: healthcare facilities, restaurants, hotel lobbies, offices, libraries, schools, corridors and stairwells, but also surfaces exposed to frequent contact with moisture : such as bathrooms, walls around pools & kitchens.
  • A waterborne silicate paint for application on the exterior and interior. It protects facades from moisture absorption, giving a durable, hydrophobic layer with good adhesion and very high vapor permeability. It is resistant to washing and weathering. It includes measures to prevent the growth of algae, mold and mildew on the surface. It can be used on: mineral and polymer (eg acrylic), concrete & brick walls.
  • A silicate priming preparation for priming before applying a silicate plaster or paintingwith a silicate paint. Designed for use on a variety of building materials such as: mineral and polymer (eg acrylicplasters), concrete & brick walls. Use results in an increase in adhesion, standardization of consistency & absorbency of the substrate. Prevents stains and spots. By reducing the absorption of the substrate facilitates the application of silicate paint with a brush or a roller. It is supplied as a colorless liquid (as opposed to a white acrylic formulations).

Ta strona używa ciasteczek (cookies), dzięki którym nasz serwis może działać lepiej.