Titanium LX ag
Interior latex washable Antibacterial nano
A water-soluable latex paint designed for painting of walls and ceilings of rooms that are particularly vulnerable to dirt and therefore often require washing, such as public buildings: health care facilities, restaurants, hotel lobbies, offices, libraries, schools, corridors and stairwells, as well as surfaces exposed to frequent contact with moisture : bathrooms, walls around pools, kitchens. It gives a waterproof, flexible, smooth, very well covering, crisp coating with high durability on a variety of building materials such as plaster, concrete, brick, gypsum, wood and wood-based materials, plasterboard, paper and fiberglass soiling. Soiled surfaces can be cleaned with water and mild detergent using a cloth or soft brush. The coating is resistant to non-oxidizing disinfectants. It is based on an aqueous polymer dispersion with addition of pigments, mineral fillers and improvers. It includes a catalyst obtained by nanotechnology. It is produced in a basic white color, but on request can be colored with high quality pigments for a range of pastel colors.
The product is effective in removing gaseous urban and industrial contaminants, such as tobacco smoke, sulfur dioxide, carbon monoxide, nitrogen oxides, aldehyde vapors, alcohols (methanol, ethanol, isopropanol ), aromatic and aliphatic hydrocarbons (benzene, toluene, ethylbenzene, xylene, kerosene, gasoline ). Larger area covered with the photocatalytic paint means faster elimination of contaminants from the environment. As a result of photocatalytic processes occurring in the presence of light and oxygen ( from air ), air pollution coming in contact with painted surfaces will oxidize and change into substances that are harmless to health and the environment. The nanocatalyst component (contained in the paint) cleans stained walls, such as nicotine stains. This happens by means of direct light, reflected, or scattered sunlight and artificial light. In case of insufficient natural light, in order to maximize the use of the paint, it is advisable to install additional lighting. Precipitation is a factor determining the effectiveness of self-purification, but even moisture in the air ( such as indoors ) is sufficient for the process.
Surface preparation and application:
The surface to be painted should be cleaned, loose paint removed and degreased. Old layers of dry glue and lime paints must be removed. Fresh cement-lime plaster can be painted no earlier than 4 weeks after application. Smooth surfaces are roughened with sandpaper. Holes and cracks filled acrylic filler or plaster. In the case of fresh plaster, inconsistent or absorbent substrates surface should be primed with acrylic SIL-GRUNT, which greatly increases the durability of the coating. The paint is ready for use and only if the mixture thickens, you can add up to 5% of tap water. Do not add chalk, lime and dry glue paints. Mix the contents thoroughly before painting.. Tools and surfaces splashed with paint should be cleaned before the paint is dry.
- paint with a roller, brush or spray, after appropriate dilution
- use and store at: +5-35 ° C
- Drying time: about 2 hours.
- recommended number of layers: 1-2
- Efficiency: 10-12 m2 / l
- washing of equipment and dilution - tap water
- has a PZH Hygienic Certificate
- Declaration of Conformity No. 42/2007 dated. 10.01.2007
- norm: PN-C-81914: 2002
- Warranty 24 months from date of manufacture
Colors marked with (*) are available upon request, when ordering a minimum of 100 L.
Colors marked with (**) are available upon request, when ordering a minimum of 200 L.
Colors marked (X) are temporarily unavailable.
With the release of the new version of the previous card expires.